bing tracking image

Lexus RX 300 Hitch Bike Racks Installation And Review Videos

     

Thule Hitching Post Pro Hitch Bike Rack Review - 1999 Lexus RX 300- Video

Thule Hitching Post Pro Hitch Bike Rack Review - 1999 Lexus RX 300

Today on this 1999 Lexus RX300, were going to be test fitting the Thule Hitching Post Pro, Part # TH934XTR. To mount our bike carrier to our vehicle, the first thing we need to do is remove the adapter sleeve which we have already done. Well take the shank of the bike rack and insert it into the receiver tube of our hitch. Well line up the hitch pinholes then well start to tread in our anti rattle bolt and we'll tighten it down with a 3/4 inch wrench. Once we've done that, we're going to check for rear vehicle access. Well remove the pin at the base of the rack and tilt it down. more


Watch Video

6/26/2012 1:48:25 PM



Thule Parkway 2 Hitch Bike Rack Review - 2000 Lexus RX 300- Video

Thule Parkway 2 Hitch Bike Rack Review - 2000 Lexus RX 300

Today on our 2000 Lexus RX300 well be test fitting the Thule Parkway 2 bike carrier for 2 inch hitches, part #: TH958. With our bike rack already preassembled and our vehicle equipped with a 2 inch hitch well go ahead and slide the bike rack shank directly into the receiver tube of the hitch lining up the hitch pinhole. Then well install and tighten down the anti-rattle bolt. This is what our bike rack will look like when its installed on the vehicle. As you can see with our anti-rattle bolt tightened down it really takes out any movement between the bike rack and the vehicle. Now well go ahead and give you a few measurements. more


Watch Video

5/7/2012 12:59:44 PM



Thule Hitching Post Pro Hitch Bike Rack Review - 2000 Lexus RX 300- Video

Thule Hitching Post Pro Hitch Bike Rack Review - 2000 Lexus RX 300

Today on our 2000 Lexus RX300 were going to test fit the Thule Hitching Post Pro, folding and tilting 4 bike carrier for inch and a quarter and 2 inch receiver hitches part #: TH934XTR. With our bike rack already preassembled and our vehicle equipped with a 2 inch hitch we can go ahead and slide the bike rack shank directly into the receiver tube of the hitch, tightening down the anti-rattle bolt. With our anti-rattle bolt tightened down you can see it really takes out any movement between the bike rack and the vehicles. This is what our bike rack will look like once its in the installed and in the stored position. Next, well go ahead and give you a few measurements. From the nearest point of the bumper to the nearest point of the bike rack is 8 inches. more


Watch Video

5/7/2012 12:59:29 PM



Thule Doubletrack Hitch Bike Rack Review - 2000 Lexus RX 300- Video

Thule Doubletrack Hitch Bike Rack Review - 2000 Lexus RX 300

Today on our 2000 Lexus RX300 well be test fitting the Thule Double Track platform style 2 bike carrier for inch and a quarter and two inch hitches part #: TH990XT. With our bike rack already preassembled and our vehicle equipped with a two inch hitch we can go ahead and slide the bike rack shank directly into the receiver tube of the hitch lining up the hitch pin hole and installing the anti-rattle bolt. As you can see with the anti-rattle bolt tightened down it really takes out any movement between the bike rack and the vehicle. Next were going to give you a few measurements. From the nearest point of the bumper to the nearest point of the bike rack platform it is 3 inches. With the bike rack installed in the stored position it adds an additional 12 inches to the overall vehicle length and from the lowest point of the bike rack we have 13 and a quarter inches of ground clearance. more


Watch Video

5/7/2012 12:59:04 PM



Thule Apex 4 Hitch Bike Rack Review - 2000 Lexus RX 300- Video

Thule Apex 4 Hitch Bike Rack Review - 2000 Lexus RX 300

Today on our 2000 Lexus RX300 well be test fitting the Thule Apex 4 Bike carrier for inch and a quarter and two inch hitches part #: TH9025. With our bike rack already preassembled and our vehicle equipped with the two inch hitch well go ahead and slide the bike rack shank directly into the receiver tube of the hitch, lining up the hitch pinhole using the integrated hitch pin lock. Alright, with that done this is what our bike rack will look like in its stored position. Next well go ahead and give you a few measurements. From the nearest point of the bumper to the nearest point of the base of the bike rack is 3 inches. With our bike rack installed in the stored position we add an additional 13 inches to the overall vehicle length. more


Watch Video

5/7/2012 12:58:38 PM



SportRack EZ Hitch Bike Rack Review - 2000 Lexus RX 300- Video

SportRack EZ Hitch Bike Rack Review - 2000 Lexus RX 300

Today on 2000 Lexus RX300 well be test fitting the sport rack 2 bike hitch mounted bike carrier part #: A30901. With our bike rack already preassembled and our vehicle equipped with a two inch hitch well go ahead and slide the bike rack shank directly into the receiver tube of the hitch. Well install and tighten down the anti-rattle bolt and safety clip. This is what our bike rack will look like when its installed in the stored position. Next well go ahead and give you a few measurements. From the nearest point of the bumper to the nearest point of the platform of the bike rack is 8 inches. more


Watch Video

5/7/2012 12:57:48 PM



Thule Vertex 4 Hitch Bike Rack Review - 2000 Lexus RX 300- Video

Thule Vertex 4 Hitch Bike Rack Review - 2000 Lexus RX 300

more


Watch Video

5/4/2012 5:52:33 PM



  1